Available on backorder
Description
The Microswitch / Ice Full Sensor Assembly is an electro-mechanical safety control used in commercial ice machines. It monitors ice levels inside the storage bin to prevent mechanical jams, freeze-ups, and water overflows.
Features
- Snap-Action Micro Mechanism: Provides crisp, instantaneous contact transfer to prevent electrical arcing and scorching under continuous usage.
- Low-Torque Actuator Lever: Features an extended stainless steel wire arm or roller leaf lever that triggers with minimal physical pressure from falling ice cubes.
- Single-Pole Double-Throw (SPDT) Circuitry: Features three processing terminals (COM, NC, NO) to support both open-loop and closed-loop control boards.
- Moisture-Resistant Sealed Housing: Built with an IP64 or higher sub-miniature casing to prevent condensation, water droplets, and frost from shorting internal contacts.
- Gold-Plated or Silver Contacts: Engineered with low-resistance alloy plating to reliably handle low-voltage milliamp DC logic signals from modern electronic motherboards.
- High-Elasticity Spring Return: Internal beryllium-copper leaf springs ensure the paddle snaps back instantly into position the moment ice is cleared.
Available on backorder
Add to WishlistRelated Products
-
Hobart Key
Hobart Key with Rounded Ends, Planetary Shaft, for HL400 Mixer
-
Hobart Centerline™ Edge Series Slicer (12″ Knife)| 3005-EDGE12
The Centerline™ Edge Series Slicers are efficient, economical and easy to clean. The series includes four manual, gravity-feed slicers (EDGE10, EDGE12, EDGE13 and EDGE14) and one automatic model (EDGE13A). In so many ways, they can give you and your operators the edge you need to keep customers coming back for more. With the added protective features, you’ll feel good about having it in the back of the store too.
-
Hobart Key, 1/4 x 1/4 x 1/8″, Motor | 3008-00-012430-00004
Hobart Key, 1/4 x 1/4 x 1/8″, Motor for Mixer
-
Hobart Magnet Holder – Lower
Hobart Magnet Holder, Lower, Bowl Guard
